Spring Blossom Wedding Table Numbers 11–30
Goodies You Can't Google
You've found a member-exclusive project. But for less than the price of a fancy coffee... You'll get instant access to this and over 2,000 other premium projects inside the Lia Griffith membership!
Become a Member
Back by popular demand is our spring blossom DIY wedding table numbers! Originally shared back in February, we have had so many requests for numbers higher than 10 that we just had to do it. So here, for those planning a big old celebration are printable wedding table numbers 11 through 30. Pop back to February’s post to get 1–10.
For a Love that Keeps Growing
There is so much fun to be had when handcrafting your wedding day – or helping out with a friend’s celebration. So whether you’re planning your wedding day or someone else’s, we are here to make it simple for you to achieve a truly memorable day.
To complement our spring blossom wedding table numbers, we also have DIY wedding tutorials for wedding invitations, cupcake and wedding cake toppers, family seating signage, and paper lanterns. When you’re ready to create your table numbers, just download and cut the template below. Happy wedding planning! ~ Lia
Tools
- Cutting Machine
- Detail Scissors or Detail Knife (if cutting by hand)
- Low-Temp Hot Glue Gun
Materials
- Frosted Text Weight Paper — PaperPapers Stardream Metallic Crystal
- Bamboo Skewers
Instructions
- Download the PDF template or SVG file below.
- Using your cutting machine or scissors, cut out the table numbers you need.
- Glue bamboo skewers onto each table number. See this post for inspiration.
All the Goodies You Can't Google 🎁
Tired of scrolling endlessly for the perfect project? Save time, money, and Google-induced headaches with us! Our membership makes it easy to create beautifully finished crafts without needing to look all over the internet for ideas and materials or spend lots of money on individual videos and templates.
Become a Member
Discussion
Ask Lia or the community!
20 Comments
-
Ruth Aguirre
October 26, 2019 at 11:13pm
-
Lia
October 29, 2019 at 9:14am
@Ruth Aguirre
-
annie patricio
July 29, 2018 at 8:25pm
-
Lia
August 2, 2018 at 8:13am
@annie patricio
-
Pam Battaglia
November 25, 2017 at 6:19am
-
Lia
November 27, 2017 at 10:44am
@Pam Battaglia
-
Brianne Sorensen
September 1, 2017 at 6:29pm
-
Lia
September 4, 2017 at 2:32pm
@Brianne Sorensen
-
Melissa Washburn
March 28, 2017 at 7:14am
-
Lia
March 28, 2017 at 9:05am
@Melissa Washburn
-
Alison Liu
December 29, 2016 at 9:52pm
-
Lia
January 10, 2017 at 2:29pm
@Alison Liu
-
Ruzana
November 4, 2015 at 12:28pm
-
Lia
November 4, 2015 at 2:48pm
@Ruzana
-
Lucinda Bassett
September 16, 2015 at 1:11am
-
Lia
September 16, 2015 at 8:42am
@Lucinda Bassett
-
Lucinda Bassett
September 17, 2015 at 9:35am
@Lia
-
Lucinda Bassett
September 13, 2015 at 8:12am
-
Lia
September 14, 2015 at 10:03am
@Lucinda Bassett
Leave a CommentHi I downloaded the svg file and noticed that theres only numbers 11-30. Is there another file that I should be downloading? Thanks.
Hi Ruth!
Numbers 1-10 are in a separate post, we had so many requests for 11-30 we had to create a second post! 🙂 The link to the first post with 1-10 is in the first paragraph of the post 🙂
Hi.
I downloaded this. But i realized that its only until table 30. Our tables are small. 4 per table and I have 32 tables is there a way to get these last table numbers? thank you!
I’m sorry Annie, we only have up to number 30 available!
Hi, I just joined and I want to print these Blossom Table Numbers. The file 1-10 is great, but the file 11-30 has a cut line in the upper left corner of every number. I see someone else commented above about it. If you open the file up and look at it, you can see the line. The numbers 1-10 do not have this line. I’m wanting to use these numbers for my daughter’s wedding. Can you please let me know once the file has been corrected. Thank you!
It seems that there was a rogue point in the SVG that the recently updated Design Space was interpreting as a line to cut. Sorry about that! The download link should be fixed with the new updated file.
Hi,
I’m going to try my best to explain what is happening, but I’m not sure I have the right words to articulate it. When I save this as an SVG file and upload on Design Space, there is a cut line that appears in the left upper corner that is not there when I open the file from this website. It ends up cutting off some of the leaves and cuts into the top corner. Is there any way I can fix this? Is this Design Space or an issue with the file? I hope this makes sense… I really want to use these for my wedding, as the first set of files does not have this issue, and they look gorgeous with my centerpieces.
Hi! I just checked the file and am not seeing any errors (and we haven’t heard from other members who’ve had trouble). Can you send a screen shot to hello@liagriffith.com so we can look into it further?
Hi,
I was wondering what size you recommend cutting these at? I was thinking 5 inches would be good. thoughts?
Yeah ours were 5″ 🙂
Just wondering if there is any way I can use this template, but not have the numbers cut out. Instead, I wanted to cut the numbers out using vinyl.
Hey Alison, so sorry but the templates can only be used as is. We don’t have a version without the numbers.
Lia what is the font here?? See how your 0 cuts so nicely , any font i use cuts the entire circle leaving a hole – i am trying to create sth with numbers but having a hard time figuring out a font for letters and numbers that wouldnt cut the entire part
We customize our typefaces to be compatible with the Cricut depending on the project. I would say that for the 0 you can try leaving a line of paper through the center to hold the number together. Best of luck!! 🙂
-Lia
wait!! Ive found it in my files and imported it but its black! How do I make it red to it cuts please? So sorry for all the silly questions!
I am not sure I understand your question correctly. The black file is for a svg file, you can cut it on any color paper. If you are looking to cut by hand there is a pdf file. Hope that answers your question:-)
I understand I have to click on ‘cut line’ now and it’ll show a red outline and cut! Thanks anyway.
its a long time since i downloaded any thing. Please can you remind me ….is it the sag I need for a Silhouette and then how do I actually get it into my library?! thanks!
You need the Designer Edition of the Silhouette software to upload the svg files:-)
Back to the Top